If you are using any KVM switches, USB hubs, port replicators and docking stations, you may unplug them and check.
For more information on this:
⚠ Тільки зареєстровані користувачі бачать весь контент та не бачать рекламу.
You may also try the below steps and check if it helps.
1. Connect the webcam directly to your computer on a USB 2.0 port.
2. Open the Device Manager.
3. Open the Imaging devices section.
4. Right-click on the C920 entry then select Update driver.
5. Choose “browse my computer for device drivers” and click Next.
6. Choose Let me pick from a list and click Next.
7. Check the box for Show Compatible Hardware.
8. Select USB Video Device and click Next.
9. Wait for the drivers to install then Finish. Click Restart when prompted.
10. Test the webcam afterwards.
Reference:
⚠ Тільки зареєстровані користувачі бачать весь контент та не бачать рекламу.
Короче винда сама должна подобрать драйвер из базы